Thursday 13 April 2017

Ovolo

Its been a while since I last played with a Yavuz Demirhan puzzle. The last one was the Quadrant 1 reviewed over a year and a half ago. This time, Yavuz's design is the Ovolo, which was also the Exchange Puzzle of Brian Young at last year's IPP36 in Kyoto, Japan.


This is a rather nice and unusual looking 8 piece interlocking puzzle, consisting of 6 board pieces cut from 10mm acrylic and two other wooden pieces (made fromQueensland Blackbean) each comprising of three sticks glued together - like in the form of the X, Y and Z axes (see photo).  

Dimensionally the size of the assembled puzzle is 7cm x 7cm x 7cm. Construction fit and finish from Brian is as usual, impeccable and the combo of acrylic and wood gives the puzzle a rather interesting and striking appearance.


The object of course is to dis-assemble the puzzle and then -reassemble it. Taking the puzzle apart was not too difficult for me and it took just a bit of experimentation to find out how the pieces moved. I took my time with the Ovolo, wanting to commit the moves to memory so that I could (hopefully) re-assemble the thing without any help later. Took me somewhere around 5-6 moves and I got the first piece out. The rest came apart quite easily thereafter.


As Brian says on his website which retails the Ovolo for A$40/-..."this puzzle is not so difficult to take apart. But mix up the pieces, walk away and forget about them, come back later and you'll find it quite difficult to put back together. There are many false moves and dead ends; 42 false assemblies and just ONE level 5 solution.


Brian is absolutely spot on about the ease of taking the puzzle apart...but unfortunately I didn't even have to "mix up the pieces, walk away and forget about them..."; in fact while I immediately tried to put everything together hoping my memory of the moves was still fresh....I couldn't!  Somehow I got the orientation of the pieces wrong and ended up with the false assemblies. Visually, the clear acrylic was no help either and in fact added to the confusion and difficulty (that's why perhaps acrylic was used).

Finally after several days, I threw in the towel and emailed Brian/Sue for the solution. The assembly process didn't quite seem the exact opposite of the way I had taken apart the pieces...but no complaints...I got the Ovolo back to its original state. Nice attractive looking puzzle with fairly simple looking pieces. Don't let the level 5.2.2.1.1.3 solution fool you. Relatively easy to disassemble but putting everything back together can be a real nightmare! 


3 comments:

  1. The disassembly isn't linear (there's quite a few options to take it apart, and thus also to put it together). I'd assume that the solution Brian/Sue provided was either the default assembly from burrtools, or a hand chosen assembly method that is more stable and easy to follow.

    ReplyDelete
    Replies
    1. William, yes I received the Burr Tools solution which showed the linear assembly. I am not sure of the other options but I suspect if you could remove the pieces with some slight twisting.

      Delete
    2. By linear I meant a fixed sequence, so non-linear just means there's a lot of choices in moves that can all lead to the puzzle falling apart! No rotations required, sorry for the ambiguous phrasing :)

      Delete